If you are researching a siding replacement, you have probably run into the phrase concrete board siding cost more than once—and for good reason. Fiber cement (often called concrete board) is one of the most popular choices for Denver homeowners because it stands up to hail, freeze–thaw cycles, and intense high-altitude UV. But what does it actually cost to install here in the Mile High City? We break down real-world pricing, the factors that move your quote up or down, and how concrete board compares to the alternatives so you can budget with confidence.
What Is Concrete Board Siding?
Concrete board siding—more commonly known as fiber cement siding—is a composite material made from cement, sand, and cellulose fibers. It is pressed into planks, panels, or shakes that mimic the look of painted wood without the maintenance headaches. The category is dominated by a few trusted brands, most notably James Hardie, along with LP SmartSide (technically an engineered wood product, but often quoted alongside fiber cement) and Diamond Kote, a pre-finished fiber cement system. If you want to dig into the technical details, the team at James Hardie’s fiber cement learning center is a great resource.
Here in Denver, concrete board has earned a loyal following. It does not warp in the sun the way vinyl can, it resists the woodpecker damage common along the Front Range, and it holds paint far longer than cedar in our dry, UV-heavy climate.
Average Concrete Board Siding Cost in Denver
Let’s talk numbers. Nationally, fiber cement installation typically runs between $6 and $13 per square foot, but Denver-area pricing tends to land slightly above the national midpoint because of our climate demands and labor market. Most homeowners in neighborhoods like Wash Park, Cherry Creek, and LoDo can expect a full concrete board siding cost somewhere in these ranges for an average 2,000-square-foot home:
- James Hardie lap siding: roughly $14,000–$22,000 installed, depending on product line and finish
- Diamond Kote pre-finished siding: roughly $16,000–$24,000, with the payoff of a longer paint warranty
- LP SmartSide: roughly $12,000–$19,000, a popular mid-range alternative
- Accent details (shakes, trim, soffit): add $2,000–$6,000 depending on complexity
Keep in mind that these are ballpark figures. The only way to know your true concrete board siding cost is to have a local contractor measure your home, inspect your sheathing, and quote the exact product and color you want. That is exactly what we do during our free in-home estimates across the Denver metro area.
What Affects Your Price Along the Front Range
This section explains the key details and how they apply locally before we dig into specifics.
Climate Requirements
Colorado weather is a major cost driver. Our freeze–thaw cycles punish cheap materials, and hailstorms—like the severe events that have hammered Denver in recent years—can destroy lesser siding in a single afternoon. Many Denver homeowners choose thicker fiber cement products or impact-rated panels, which cost more upfront but survive claims season after season.
Home Height and Complexity
A two-story Victorian in Cherry Creek with turrets, gables, and decorative trim will always cost more than a simple ranch in Aurora. Cut-ups, corners, and stories add labor hours, and fiber cement is heavier and slower to install than vinyl—part of why you pay more for skilled crews.
Old Siding Removal and Wall Condition
If your existing siding is hail-damaged or your sheathing has moisture problems, removal and repair costs add up quickly. In older Denver neighborhoods, we frequently find hidden rot beneath 1980s-era aluminum or wood siding, and addressing it properly protects your investment.
Finish and Color Options
Factory-finished products like Diamond Kote cost more per square foot but eliminate the need to repaint for 15–20 years. Field-painted James Hardie is cheaper upfront but requires painting after installation. When we calculate concrete board siding cost for homeowners, we always walk through this trade-off so there are no surprises later.
Concrete Board Vs. Other Siding Options
How does fiber cement stack up against the alternatives Denver homeowners usually consider?
- Vinyl siding: cheaper upfront ($4–$8 per square foot), but vulnerable to hail punctures and UV fading at our altitude
- Wood/cedar siding: beautiful, but high-maintenance and prone to warping and woodpecker damage in our dry climate
- Engineered wood (LP SmartSide): a solid mid-range option, easier to install than fiber cement but slightly less hail-resistant
- Stucco: common in older Denver homes, but cracks during freeze–thaw cycles and is expensive to repair
When you weigh lifespan, warranty strength, and resale value, concrete board consistently delivers the best long-term value for Front Range homes. It is also a strong selling point with buyers who know what Colorado weather can do to a house.
How to Maximize Your Siding Investment
A few smart moves can stretch your budget and protect your concrete board siding cost estimate from ballooning:
- Get multiple quotes—but make sure each contractor specifies the same product, thickness, and finish so you are comparing apples to apples
- Ask about manufacturer-certified installers; James Hardie and Diamond Kote both offer extended warranties through certified contractors like us
- Consider replacing gutters, trim, and soffits at the same time to save on mobilization costs
- Check whether your project qualifies for insurance assistance if you have documented hail damage
We have helped homeowners from LoDo lofts to Wash Park bungalows plan projects this way, and the difference in final cost is often thousands of dollars.
Get a Free Concrete Board Siding Estimate from Siding Denver
At Siding Denver, we have spent years installing fiber cement siding across the metro area, and we know exactly what it takes to make a siding system last through Colorado’s wildest weather. Whether you are leaning toward James Hardie, Diamond Kote, or you simply want honest advice about your concrete board siding cost, our team is ready to help. You can learn more about our residential siding services in Denver or explore our experience with James Hardie siding installation in the Denver area.
Ready for real numbers? Contact us today for a free, no-pressure estimate. We will measure your home, review your options, and give you a detailed quote so you can make the best decision for your house, your budget, and your family.







